General Introduction
The
Vestamatic
Rolltec Pro
roller shutter control is used for the
manual and automatic mode of electrically driven roller shutters. Its
numerous functions can be customised to your personal require-
ments.
The delivery extent of the
Vestamatic
Rolltec Pro
roller shutter control
includes the following items:
1. Cover cap
2. Basic housing
3. Supporting frame basic housing
4. Combination frame one-fold – Jung “CD 500”, alpine-white
In case of power failure, the previously programmed times remain
stored for 6 hours. During that time, the display does not indicate.
After the line voltage has been restored, the
Vestamatic
Rolltec Pro
roller shutter control automatically fast forwards to the current time. If
a power failure lasts 6 hours, the readjusting process can take up to
4 minutes. The roller shutter control is not ready for operation during
the readjusting process.
The last pending up or down command during power failures will be
executed after the current time is readjusted.
- 39 -
G
Introduction Manual mode
The
Vestamatic
Rolltec Pro
roller shutter control features a selector
button with which manual mode (MAN) or automatic mode (AUTO)
can be selected.
Press the selector button until the display indicates (MAN) in order to
activate the manual mode.
All automatic functions are now disabled. Pressing the up or down
button will move the roller shutters up or down.
Simply press the opposite button to stop the motion, i.e.:
·
press the down button, if the roller shutter is moving up,
·
press the up button, if the roller shutter is moving down.
Accurate positioning of the roller shutter is guaranteed because the
roller shutter will only move up or down again after the up or down
button has been pressed.
- 40 -
G
83100811.qxd 11.09.01 12:17 Seite 41
