Astro function Programming the special functions
If you want to change the sunrise/sunset times programmed by the
manufacturer, you have the option to correct theses times by +/- 59
minutes. Press set and programming button (P) simultaneously.
Then repeat pressing only the set button until the display indicates
the following:
(ßßßßOßNA
Then press the programming button (P) twice and the display will
indicate the following:
o2ßßß0ß0A
This is the submenu “corrected sunrise time up” of the program “Astro
function”.
Press the up button to set the minutes which shall be added to the
sunrise time and the down button to set the minutes which shall be
substracted from the sunset time. Press the programming button (P)
again and perform the corresponding steps as described above to set
the corrected down times.
- 59 -
G
Programming the special functions Astro function
If you want the roller shutter not to open and close at sunrise/sunset
on a particular day of the week, you have the option to take this day
out of the programming and instead use the previously set up or down
times for this day of the week. NOTE: You must activate the week
function before you can apply this menu option (please see pages 52
and 53).
Press set and programming button (P) simultaneously. Then repeat
pressing only the set button until the display indicates the following:
(!ßßßOßNA
This is the menu option “cancel Astro weekday”.
Press the programming button (P) to select the weekday that shall
be taken out of the programmed sunrise/sunset times and press the
up button once. The display will now indicate “
0ßfßf
” and the switching
times of the selected weekday are now based on the set up and down
times.
After approx. 2 minutes the display switches to the current time and
the roller shutter control switches to the programmed up and down
times.
- 60 -
G
83100811.qxd 11.09.01 12:17 Seite 61
