The control is delivered with the following manufacturer’s default up
and down times (day function is activated):
Daily up time
–
0ß6:0ß0
p.m.
Daily down time –
2ß0:0ß0
a.m.
Please find the manufacturer’s default DIP switch settings in the
tables on page 58 and page 61.
- 49 -
G
Note
Basic functions
IMPORTANT!
It is important to push the selector switch “automatic/
manual-mode” to auto matic mode (A), in order to be able
to perform the following programming steps.
Check the current setting. If the selector switch is not set on
(A), correct the setting by pushing it all the way to the left
until you hear the “click”.
x
By operating the combination of set and up button you can set the
up time.
Setting the up time can be performed as follows:
1. Press the set button first and keep it pressed, then:
A. Press the up button and keep it pressed to
fast forward
the
up time.
B. Shortly tap the up button to
slow forward
the up time.
or
2. Press the up button first and keep it pressed, then:
A. Press the set button and keep it pressed to
fast reverse
the
up time.
B. Shortly tap the set button to
slow reverse
the up time.
The display will now indicate the set value. Once the programming
buttons are no longer operated, the display will indicate the current
time again. Tapping the up button will check the set value and the
display will again indicate the previously set up time. After approx.
2 seconds, the display will indicate the current time again.
- 50 -
G
Basic functions
Up time
