background image

G

Below the switching sequence is presented in the course of an entire year under con-

sideration of summer/winter time, at an up time preset at 6 : 30 and a down time preset 

at 19 : 30. These times relate to 10° of eastern longitude and 50° of northern latitude 

which corresponds to the geographical location of the city of Würzburg. Setting DIP 

switch 6 to “ON” will delay the down time of the roller shutter by 30 minutes.

Run time 

correction:

- 57 -

DIP 6 

Correction

OFF 

no delay

ON 

down command 30 minutes delayed

Astro function /Run time correction 

Special functions

G

- 58 -

  DIP 2  DIP 3  DIP 4  DIP 5  Area

 

OFF OFF OFF OFF Schleswig-Holstein, 

Northern 

Lower-Saxony

 

OFF OFF OFF ON  Mecklenburg-Vorpommern

 

OFF OFF ON  OFF North-Rhine Westphalia, Southern Lower-Saxony

 

OFF OFF ON  ON  Brandenburg, 

Saxony-Anhalt

 

OFF ON  OFF OFF Rhineland-Palatinate, 

Saarland, 

Hesse

 

OFF ON  OFF ON  Saxony, 

Thuringia

 

OFF ON  ON  OFF Baden-Württemberg

 

OFF ON ON ON Bavaria

Special functions 

Astro function – Germany

= Manufacturer’s default setting:

   Schleswig-Holstein,

   Northern Lower-Saxony

The respective DIP switches are located on the rear panel of the control.

Y12345C

Summary of Contents for Rolltec Plus G/S





















Reviews: