background image

„

 Product Features

 

AC type corona discharge 

• This is an AC corona discharge type ionizer. The ion balance is not disturbed by needle 
contamination. 
• A high-frequency piezoelectric transformer is incorporated. Losses caused by recombination of ions 
are reduced, and ions are generated efficiently. 

 

Fan type ionizer 

• The light wind 120 mm square DC fan feeds ionized air softly. 
• The fan’s airflow volume can be adjusted in three steps. 
• The airflow direction can be changed vertically by adjusting the stand’s screw. 
• Components are assembled into the compact body to create a small and lightweight product. 
• The input power is 24 VDC. Power is supplied to the product from the enclosed dedicated AC adaptor. 

 

Capacitive-coupled discharge 

• The capacitive-coupled method applies a high voltage onto the discharge needle, thus providing 
outstanding ion balance stability. 

 

Variable louver function 

• The airflow direction angle on the front cover can be changed to straight or wide to set the static 
erasing range. 

 

Safe design 

• When the front cover is removed, the circuit is shut off and the power is turned OFF to prevent electric 
shocks. 
• Fan -lock alarm function and high voltage output stop alarm function are available as a standard. The 
status is indicated with LED lamps. 
• The alarm signals can be output externally to operate an external device such as lights. 
• The high-frequency piezoelectric transformer has an output shutdown function which instantly lowers 
the output in the event of a short circuit or overload. 

 

Maintenance 

• The front cover can be opened and closed with a single touch. Easy access to the internal 
components simplifies maintenance. 
• The “needle electrode”, which must be cleaned or replaced, is unit-type module which can be 
replaced easily without tools. 

 

Environment measures   

• RoHS compatible product 

 

CE compliance product (EMC Directive) 

• Various tests have been performed based on EN61000-6-4 and 6-2, and the basic requirements of CE 
have been satisfied. 
 

Applications 

Use to prevent trouble and dust adhesion caused by static electricity. 
 
 

Summary of Contents for Stat Clean F120S-E

















Reviews: