Vessel IPC-A4, Instruction Manual

Page: 23 / 40

23
For Your Safety
Vacuuming Up
Prohibited
To prevent an accident or malfunction, absolutely do not vacuum up damp dust
or any moisture such as water or oil.
Joint Use
Prohibited
To prevent fires, absolutely do not make joint use of the following:
· When the dust could transform into a hazardous substance when mixed inside
the unit.
Prohibited To prevent fires, use the specified rated power source only.
Painting
Prohibited
Use as a painting booth is prohibited. Do not perform painting work in it.
Peering
Prohibited
Do not peer into the end of the air nozzle. The sensor will detect your presence
and blast out compressed air, which could strike your eyes or face.
Disassembly
Prohibited
Do not remove components, or modify or unreasonably disassemble the
product.
· This product is manufactured in accordance with safety and performance
standards, so removing components or modifying the product is dangerous.
·
Depending on the type of trouble, the customer might not be able to handle it,
so always contact the store where the product was purchased.
●
Remember
Be sure to observe the following to prevent electrical shock accidents:
·
Be sure to unplug the power cord from the outlet before performing any wiring.
· Be sure to ground the ground wire.
●
Remember
Discard dust from the filter pack regularly without letting it accumulate.
Depending on the conditions, dust could cause a fire or explosion hazard.
●
Remember
Be sure to unplug the power cord from the outlet before performing any
maintenance or inspection work.
⚠
CAUTION
●
Remember
Take into consideration the conditions surrounding the installation area.
· Install the unit in an indoor location, not exposed to wind, rain, or direct
sunlight.
· Do not install the unit where it may be exposed to water, oil, chemicals, etc.
· Do not install the unit where it may be exposed to marked vibrations or shock
·
The temperature range should be 5°C to 40°C. Use the unit in a humidity
range of 35 to 65%.
●
Remember
To prevent fires, conduct an inspection after work is completed.
●
Remember
Store this manual close to the product where it can be referred to quickly.
Prohibited
Do not install, use, or service this product until you understand the contents in
this manual.