Vessel GT-CD60-34, Instruction Manual

Page: 2 / 40

For Safe Use
1
Thank you very much for having purchased the "VESSEL Air Corner Drill
GT-CD60-34 / CD60-34L.”
Please read this manual carefully and understand its contents for the safe
and correct use of the air tool.
Warning: Read these instructions carefully before operating,
maintaining or servicing this tool.
■ The following icons represent the degree of danger that can be induced by
user’s action or environment. Please observe all the instructions presented
in this manual as they are important for personal and public safety.
Warning Indicates possibility of serious or fatal injuries when
instructions are not followed.
Caution Indicates possibility of injuries or property damage when
instructions are not followed.
※
Depending on circumstances, failure to follow the instructions
given in the "Caution" section could lead to serious
consequences.
■Please keep this manual for your ready reference.
■In case this manual or any of the warning labels attached to the unit are lost
or damaged, contact us or the local distributor for replacement.
■Please make sure this manual be kept with the unit when it is handed over or
lent out to a third party.
If you have any inquiries about this product or manual, please contact us
or your local distributor.
Warning Please read this manual carefully and understand the
contents fully before use.
Warning ■ Compressed air management
● Specified air pressure should be applied.
Excessive air pressure may lead to serious accidents or
property damages. Install proper equipment including a
pressure gauge and a reduction valve in order to keep the
dynamic pressure at the tool end within the specified range.
● Only compressed air should be applied.