2021/04/17 23:32
11/18
Reconfigurable Laser Servo
Product Manuals - https://www.vescent.com/manuals/
Fig. 6: Certain rarely used controls are only accessible by
removing the right-side panel, as shown in the figure above.
Fig. 7: VPN00211 board.
Selector DIP Switch Array:
Ramp→Aux / Ramp→Servo (2-position slider switch)
This 2-position slider switch is only accessible by removing the right side panel (see above) and sets
whether the ramp is applied to the SERVO OUTPUT or the AUXILIARY SERVO OUTPUT. It is factory set
in the Ramp→Servo position. When the Ramp→Servo is selected, the ramp is a ~500 Hz triangle wave
and when Ramp→Aux is selected the ramp is ~50 Hz. Additionally, when using The Absolute Jump TTL
or the Relative Jump TTL, the output jump is placed on the same channel as gets the ramp signal. The