CT33 User Manual v. X1.0 19
CL43:
Use LA43 probe. Trace the cable route by following
the signal maximum. Right above the cable there is often
a signal minimum.
Task: The route of a live or neutral cable must be
traced e.g. on a cable shelf.
-
CTT33:
Connect one transmitter output between a neutral wire of the cable and a separate grounding. Use
a ground pick if necessary.
-
CL43:
Use SA43 probe. Trace the cable route by pointing the probe to the signal minimum. At a distance
less than 0.5m LA43 probe can be used too.
-
If cable’s wires are disconnected, signal gets weaker along the path and LA43 probe works better. Closer to
the end, signal minimum gradually disappears and there is only a signal maximum above the right cable.
