VES Andover Ltd Eagle Close Chandlers Ford Ind. Est Eastleigh Hampshire SO53 4NF
Tel: 08448 15 60 60 Fax: 02380 261204 E-mail: [email protected] Web: www.ves.co.uk
ecovent
NRG
Air Handling Units
Installation, Operation and Maintenance Manual
5
Continued
The unit comes fi tted with an ABS drainpan as standard, for use with an optional peristaltic pump.
See later in this section for instruction on fi tting the pump and sensor.
Should the unit handing need alteration follow the following instructions in fi gure
Installation
Size 0
Top access unit
drainpan
reorientation
Fig.
4
Remove the lid.
Using a cross-head screw driver, remove the
four support covers as shown, retaining the
screws. Take especial care when working
around the speed controller section.
Remove the heat exchanger, carefully
lifting straight up and out, taking care not to
damage the heat exchanger fi ns or seal whilst
doing so.
Withdraw the drainpan, turn anticlockwise
90° (so that the drain part of the tray is
adjacent to the other fan) and replace.
Note: fi tting the pump sensor can be easier
when the drain pan is outside the unit.
Replace the heat exchanger and silicon into
place along all supporting upright angles as
shown.
Replace and secure the four support covers,
taking care to ensure the heat exchanger
assembly is safely held in position.
Replace the lid, ensuring all fasteners are
closed.
This drain is
NOT
suitable for trapping by traditional trapping methods
Important
