In order to transmit data files or messages, this device requires a good quality connection to the network.
In some cases, transmission of data files or messages may be delayed until such a connection is available.
Ensure that the above separation distance instructions are followed until the transmission is completed.
Use of phone accessories and enhancements may result in different SAR values. SAR values may vary
depending on national reporting and testing requirements and the network band. Additional SAR
information may be provided under Product information at
www.vertu.com
.
USA and Canada
Your phone is also designed to meet the requirements for exposure to radio waves established by the
Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit
of 1.6 W/kg, averaged over one gram of tissue. The FCC/IC highest SAR values reported under this
standard during Product certification for use at the head is 0.77 W/kg and when properly worn on the
body (10 mm gap) are 0.98 W/kg and 0.96 W/kg.
Your phone may cause TV or radio interference (for example, when using the phone in close proximity to
receiving equipment). The FCC or Industry Canada can require you to stop using your phone if such
interference cannot be eliminated. If you require assistance, contact Vertu Customer Service.
The Product, or Products, comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (i) the Product(s) may not cause harmful interference,
and (ii) the Product(s) must accept any interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly approved by Vertu could void the user’s
authority to operate this equipment.
This Class B digital apparatus complies with Canada ICES-3(B)/NMB-3(B).
The device could automatically discontinue transmission in case of absence of information to transmit or
of operational failure. Note that this is not intended to prohibit the transmission of control or signalling
information or the use of repetitive codes where required by the technology.
l
The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful
interference to co-channel mobile satellite systems.
l
The maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and
5470-5725 MHz) to comply with the limit on equivalent isotropically radiated power (EIRP).
l
The maximum antenna gain permitted (for devices in the band 5725-5850 MHz) to comply with the
EIRP limits specified for point-to-point and non point-to-point operation as appropriate.
In addition, high-power radars are allocated as primary users (meaning that they have priority) of the
band 5250-5350 MHz, and these radars could cause interference and/or damage to licence-exempt LAN
devices.
Safety and warranty
© 2015 Vertu Corporation Limited. All rights reserved.
81
