VERTIV INTELLIGENT RACK PDU
Page 37
and
Display the unit's primary IPv4 address. Both buttons must be
pressed at the same time.
Enable VLC* mode by pressing the center button three times within
x
3
2 seconds. Pressing the button while VLC mode is active will return
the unit to the standard Current display.
*See VLC section of manual for more information on this feature.
NOTE
Display Button functionality may vary based on unit configuration
.
6.
Remote Sensor Port :
RJ12 port for connecting a Vertiv plug-and-play remote digital sensors
(sold separately). Each digital sensor has a unique serial number and is automatically discov-
ered. GU2 PDUs support up to 16 sensors. The optional Vertiv A2D Converter can be added
to support analog sensing.
7.
Proprietary Connectivity :
RJ45 port for future expansion.
8.
USB Port :
USB Port used to upload firmware, backup/restore device configuration, or ex-
panded logging capacity via USB storage device. Provides up to 500mA power capacity for
USB connected devices.
NOTE
GU2 PDUs support the use of USB MSC devices such as thumb drives or
external hard drives. USB Storage Devices must be formatted as FAT32
.
