Vertiv™ NetSure™ 211 SERIES -48 VDC Battery Cabinet Installation & User Manual (Section 6023)
|
Rev. L
25
Securing the Batteries Using the Strap
Procedure
1.
Pull strap such that enough length is provided to secure the batteries.
2.
Hold the buckle such that the strap can slip into inner slot of the buckle. See
Figure 28:
Slipping the Strap into the Buckle
3.
Then loop the strap into the outer slot of the buckle. Refer to
Figure 29:
Looping the Strap into the Buckle
4.
Pull again the strap to tighten.
5.
Rotate buckle cover to closed position to apply and lock in tension. See
6.
There should be a gap of 1/4" to 1/2" between the strap and the batteries when the buckle assembly is
pulled with light finger pressure. This will ensure the proper tension is applied to the strap.
7.
To release buckle, pull outward on free strap end.
