-or-
Click the checkbox at the top of the table to select all the receptacles in the table.
2.
Click the Disable Receptacle Power icon, then click
OK
on the pop-up window to confirm to disable power for
the selected receptacle.
-or-
Click
Cancel
to return to the Device Explorer window without disabling the power for a receptacle.
3.
From the pop-up window, click
OK
to acknowledge that the process completed successfully.
To cycle power for a receptacle:
1.
From the Device Explorer window, click the checkbox in the row of the appropriate receptacle.
-or-
Click the checkbox at the top of the table to select all the receptacles in the table.
2.
Click the Cycle Receptacle Power icon, then click
OK
on the pop-up window to confirm to cycle power for the
selected receptacle.
-or-
Click
Cancel
to return to the Device Explorer window without cycling the power for a receptacle.
3.
From the pop-up window, click
OK
to acknowledge that the process completed successfully.
To lock a receptacle:
1.
From the Device Explorer window, click the checkbox in the row of the appropriate receptacle.
-or-
Click the checkbox at the top of the table to select all the receptacles in the table.
2.
Click the Lock Receptacle icon, then click
OK
on the pop-up window to confirm to lock a selected receptacle.
-or-
Click
Cancel
to return to the Device Explorer window without locking a receptacle.
3.
From the pop-up window, click
OK
to acknowledge that the process completed successfully.
To unlock a receptacle:
1.
From the Device Explorer window, click the checkbox in the row of the appropriate receptacle.
-or-
Click the checkbox at the top of the table to select all the receptacles in the table.
2.
Click the Unlock Receptacle icon, then click
OK
on the pop-up window to confirm to unlock a selected
receptacle.
-or-
Click
Cancel
to return to the Device Explorer window without unlocking a receptacle.
3.
From the pop-up window, click
OK
to acknowledge the process completed successfully.
To cause a receptacle's LED to blink:
1.
From the Device Explorer window, click the checkbox in the row of the appropriate receptacle.
-or-
Click the checkbox at the top of the table to select all the receptacles in the table.
Vertiv
| RPC2™ Communications Module Installer/User Guide |
19
Summary of Contents for LIEBERT RPC2
Page 57: ...Vertiv RPC2 Communications Module Installer User Guide 53 ...
Page 58: ......
