Vertiv Liebert MicroPOD, Installer/User Manual

Page: 15 / 26

7. Connect all loads to the output distribution receptacles, distributing them evenly on the
Liebert MicroPOD.
8. Turn ON the loads following the manufacturer's instructions.
9. Start the UPS according to its user manual.
10. Verify that the UPS lamp (green) on the Liebert MicroPOD is illuminated. If so, transfer the
rotary switch from UTILITY to UPS. The load is now being supplied with conditioned power
through the UPS.
NOTE: Before any operation or procedure, always verify that both the UPS lamp (green) and the Utility
lamp (amber) are illuminated before changing the rotary switch.
Vertiv | Liebert® MicroPOD ™ Installer/User Guide | 15