Vertiv Liebert DPM, User Manual

Page: 22 / 82

3.1 Setting Date, Time and Time Zone
The date, time and time zone are set when the Liebert® DPMl is configured.
Changing the date, time or time zone requires Administrator or Service access if PINs are required. These settings can be
viewed, but cannot be changed, by Observers and Operators if PINs are required.
The control permits using these time protocols:
• Manual: Manually set the time for the Liebert DPM
• Network: Network Time Protocol (NTP), a TCP/IP protocol, synchronizes computer clock times in a network.
• Unity: The time of the PDU or RPP will match the time set on the Liebert® IntelliSlot card (IS-UNITY or IS-
RDU101). Refer to the card’s documentation.
The format of the date or time may be changed through the Context Menu on either the STATUS or SETUP page
(STATUS>Context Menu>Display Options>Formats or SETUP>Context Menu>Display Options>Formats) (refer to
Changing
Date, Time and Measurement Formats on page 19).
The control will display local time and UTC Time in the STATUS>Context Menu>Display Options>Date & Time view. The
control will display the selected time on the Events page and in the Audit and Event logs.
NOTE: UTC Time is a world standard that the Touchscreen Control Panel displays. It cannot be changed.
3.2 Change the Time Zone
The time zone is set when the Touchscreen Control Panel is configured (the default is America/New York). The drop-down
menu permits selecting any time zone on the globe.
To change the time zone:
1. Log in with Administrator access if PINs are required.
2. Navigate to STATUS>Display Options>Date & Time or to SETUP>Display Options>Date & Time.
3. Touch the Time Zone box or either arrow on the drop-down menu.
4. Scroll to the appropriate time zone and touch it.
5. Make any other changes on the DATE & TIME page.
6. Touch the Save button to make the changes or touch Cancel to exit without saving the changes.
Vertiv™ | User Manual
18