Figure 3.2 Vertiv™ Liebert® CRV CRC30 and CRC60 Clearance Requirements Unit mm (in.)
3.4 Inspecting the Unit
Upon arrival of the unit and before unpacking:
•
Verify that the labeled equipment matches the bill of lading.
•
Inspect that there are no visible or concealed damages on the package.
•
Check that the tilt monitor indicator on the package is not red. If it becomes red, tipping has occurred.
Report damage immediately to the carrier and file a damage claim with a copy sent to Vertiv™ or to your sales
representative.
3.5 Moving the Packaged Unit
Transport the unit with a forklift. When using the forklift:
•
Make sure the fork length is suitable for the width of the pallet.
•
Do not tilt the unit more than 20 degrees in any direction to prevent the unit from falling over.
•
Refer to the following figure for the location of the center of gravity.
3 Pre-installation Preparation
15
Vertiv™ Liebert® CRV CRC30 and CRC60 Chilled Water Cooling System User Manual
