Vertical MXB IP, Hardware Installation Manual

Page: 23 / 138

Pre-Installation 3-1
Chapter 3: KSU Installation
MBX IP Hardware & Installation Guide
Chapter 3
KSU Installation
Pre-Installation
Please read the following guidelines concerning installation and connection before installing the
MBX IP System. Be sure to comply with applicable local regulations.
Safety Installation Instructions
When installing the telephone wiring, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury, including the following:
• Never install the telephone wiring during a lightning storm.
• Never install the telephone jack in wet locations unless the jack is specifically designed for
wet locations.
• Never touch un-insulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Anti-static precautions should be taken during installation.
Installation Precautions
The MBX IP System is designed for wall mounting or a free-standing rack. Avoid installing in
the following places:
• In direct sunlight and extremely hot, cold, or humid places (optimal temperature range = 0
to 40oC).
• Places where shocks or vibrations are frequent or strong.
• Dusty places, or places where water or oil may come into contact with the System.
• Near high-frequency generating devices such as sewing machines or electric welding
machines.
• On or near computers, fax machines, or other office equipment, as well as microwave
ovens or air conditioners.
• Do not obstruct the openings on the top of the MBX IP System.
• Do not stack up the Optional Service Boards.
Release 1.0 November 2010