Vertical Edge 9200 Series Phone
Quick Guide
5
11.
Fixed buttons
Edge 9200 8-Button Phone does not support some buttons:
Flash, Directory, and Headset among the below buttons.
Flash
button: U
se to seize the new line without on-hook. So
you can make a call by dialing the desired number.
Speed
button: Use to assign your speed dial numbers. The
button also deletes the last character of an input in the
menu mode such as registering Station name.
Transfer/PGM
button: Transfers the current active call or
to enter programming mode.
Directory
button: Accesses your private or public directory
for speed dialing.
DND (Do Not Disturb)/FWD
button: Use to activate DND
so that your phone will not ring. Use to allow you to forward
all calls to another number by setting the call forward type
(1~4).
Call Back
button: When the MWI LED indicates you have
a message, use to access your Voice Mailbox.
Mute
button: Toggles audio from the microphone to the
connected party on and off.
Hold/Save
button: Use to place a call on Hold. Also, use to
access a held call. In menu mode, it saves your inputs.
Ear Mic. Headset button:
When using a Ear Mic. headset,
this button toggles the Ear Mic. headset state. When the
Ear Mic. headset is active, the button LED illuminates
red.Or, press [PGM] +19 and then set ON.
1.3 DSS Console
The available DSS (Direct Station
Selection) console shows in figure
and described as follows:
Edge 9200 48-Button Direct
Station Selection (DSS) has 48
flexible buttons with tri-color LED.
2. Installation Connecting the Phone
