Vertical Edge 9200 Series Phone
Quick Guide
8
2.2 DSS (Direct Station Selection) Console
Installation
A DSS console can be installed with Edge 9200 series phone.
As we described the available DSS for each phone, the available
DSS is as below:
Edge 9200 8-Button Phone: no DSS
Edge 9200 24-Button Phone: Edge 9200 48-Button Direct
Station Selection
Edge 9200 40-Button Phone: Edge 9200 48-Button Direct
Station Selection
The DSS console should be installed on the phone prior to making
any connections to the phone. This simplifies the installation.
To install DSS console:
1.
First, assure the
phone is NOT
connected to
power. For
convenience, you
may wish to
remove the
handset and foot-
stand; this
simplifies the DSS installation.
2.
On the right side of the phone, remove the DSS cover.
3.
Align the DSS and phone as shown in the drawing.
4.
Push the DSS
into the phone
until the DSS is
fully engaged.
5.
Insert the screws
provided through
the screw tabs in
the Button kit
and tighten the screws into the phone. Do not over-tighten.
