Vertex Water Products PureWaterCooler PureChill PWC-900, Owners & Installation Manual

Page: 4 / 24

The Vertex PureWaterCooler™ products are a means to produce
good-tasting, safe water without using bottles of stored water. The PureChill
model PWC-900 described here is made for counter top use. Its low height
permits it to fit under cabinets.
Please read all the instructions in this manual before operating the PureWater-
Cooler™ .
2.0 Receiving the Cooler
2.1 Unpacking
The PureWaterCooler™ is shipped completely assembled . Open the
top of the product carton Remove the top of the box and pull the cooler out.
Save the box and packing materials for use in the event of a return.
2.2 Inspection
Inspect the cooler for obvious shipping damage. Look at the exterior
panels to see if they are dented or damaged.
1
1.0 Introduction
NO OTHER EXPRESS OR IMPLIED WARRANTY APPLIES
This limited warranty is the sole and exclusive warranty provided to the purchaser identified above. No other
express warranty, written or verbal, applies. No agent, employee, deal or other person or entity is authorized to
alter this limited warranty or make any other warranty on behalf of Manufacturer. The terms of this limited war-
ranty shall not be modified by the Manufacturer, the purchaser/end user, or their respective successors or assigns.
WHAT WE WILL DO TO CORRECT PROBLEMS/ HOW TO GET WARRANTY PARTS
If the Vertex unit does not operate in accordance with the documentation provided to purchaser, or purchaser
have questions concerning purchasers’ Vertex unit, please contact the Dealer from whom the unit was purchased.
If the original Dealer is not available or the purchaser does not know who the Dealer is, please call or email the
Manufacturer, Vertex, using the contact information provided below. We will try to find a Dealer in purchaser
geographical area to assist purchaser. If a Dealer cannot be conveniently located, the Manufacturer, in its sole
and absolute discretion, may offer two (2) options. First, we will attempt to troubleshoot the issue with purchaser
over the phone. If the purchaser is comfortable making a repair/ replacing a part, once we understand the prob-
lem and its solution, we will send the replacement part(s) for the cooler.
This warranty is for the replacement
of part(s) ONLY; it does not cover the cost of labor for either the Dealer or the end user/purchaser. The
second option is that the end user/purchaser may, after notifying Manufacturer and receiving written authoriza-
tion/approval from Manufacturer to do so, send the unit back to Manufacturer and we will repair it.
The end
user purchaser must pay the freight/ shipping costs to return the unit to Manufacturer.
Manufacturer will
pay the freight/shipping to return the unit to the end user/purchaser following repair.
If the end user/purchaser contacts the Dealer and the Dealer repairs the unit pursuant to this limited warranty,
Manufacturer will provide parts to the Dealer at no charge; labor is not included in this limited warranty. The
Dealer may, in his or her sole and absolute discretion, decide to repair the unit on-site or take the unit to a shop to
repair.
This limited warranty covers replacement or repair of parts only. Manufacturer will not replace the entire unit if a
part can be replaced or repaired to restore the unit to full operational function. On the rare occasion that a unit
cannot be restored to full operation by a part or parts, Manufacturer will replace the unit after the end user/
purchaser has shipped the unit to Manufacturer and Manufacturer has determined, in its sole and absolute discre-
tion, that the unit cannot be repaired and must be replaced. T
he end user/purchaser must pay the freight/
shipping costs to return the unit to Manufacturer. Manufacturer will pay the freight/shipping to return the
unit to the end user/purchaser following repair or will ship a new unit if repair is not possible. If Manufacturer
does provide a replacement unit, then the Warranty Period (as specified above) for the replacement unit would
begin at the time of its delivery to the end user/purchaser.
LIMITATION OF LIABILITY AND DISCLAIMER OF WARRANTIES
TO THE EXTENT PERMITTED BY LAW, IN NO EVENT SHALL MANUFACTURER BE LIABLE
TO PURCHASER OR ANY THRID PARTIES FOR ANY INCIDENTAL, SPECIAL, INDIRECT,
OR CONSEQUENTIAL DAMAGES, INCLUDING ANY ECONOMIC LOSS, WHETHER
RESULTING FROM NON-PERFORMANCE, USE, MISUSE, OR INABILITY TO USE THE
VERTEX UNIT. MANUFACTURER SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY
DELAY IN PERFORMANCE AND IN NO EVENT, REGARDLESS OF THE FORM OF THE
CLAIM OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT, WARRANTY, TORT,
INFRINGEMENT, NEGLIGENCE, STRICT LIABILTY, OTHER TORT OR ANY OTHER LEGAL
THEORY) SHALL MANUFACTURER’S ENTIRE LIABILTY EXCEED THE PRICE PAID BY THE
ORIGINAL PURCHASER FOR THE VERTEX UNIT. THE TERM “CONSEQUENTIAL DAMAGES”
SHALL INCLUDE, BUT NOT BE LIMITED TO, LOSS OF ANTICIPATED PROFITS, BUSINESS
INTERRUPTION, LOSS OF USE OR REVENUE, COST OF CAPITAL, OR LOSS OR DAMAGE TO
PROPERTY OR EQUIPMENT.
Contact information:
Vertex Water Products 5138 Brooks Street Montclair, California 91763
800-627-2146 www.vertexwater.com email: inquiries@vertexwater.com