background image

 

17 

 

 

      11      LIMITED WARRANTY 

Vertex Water Products (“Manufacturer”) sell its products through independent retailer dealers (“Dealer”) who re-
sell to the end-user customer. In this limited warranty, “Vertex” refers to Vertex Water Products and not to the 
Dealer. 

 
WHO IS COVERED BY THIS WARRANTY 

This limited warranty covers only the first purchaser of the Vertex 

PureWaterCooler

™ from a Dealer for use by 

that purchaser, and is not transferrable. “Consumer Use” means personal residential household use by a consumer 
or consumers. “Commercial Use” means all other uses, including (but not limited to) use for commercial, income 
producing purposes and/or when purchased by a business and/or when purchased for use in an office, business, or 
industrial setting. “Purchaser” means the end-user customer, and not a Vertex re-seller Dealer. 
 

PERIOD OF COVERAGE OF THIS WARRANTY 

Manufacturer warrants the complete water cooler (“the unit”) against defects in material and workmanship, sub-
ject to the exclusions described below, for a period of ONE YEAR, beginning on the later of either (a) the date of 
purchase or (b) the date of manufacture as identified by the Vertex unit’s serial number. Manufacturer additionally 
warrants the compressor for a period of THREE YEARS from the above date. The purchaser must provide the 
original sales receipt as proof of the date of purchase. If the purchaser is unable to produce the original sales re-
ceipt, the Warranty Period commencement date will be determined by Manufacturer, in its sole and absolute dis-
cretion, based upon the unit’s serial number. This warranty does not apply if the original serial number affixed by 
Manufacturer is removed, defaced, altered, obscured, tampered with, or obliterated. If Manufacturer provides a 
replacement part or parts, or repairs a part or parts, under this limited warranty, then the replacement part(s) or 
repaired part(s) will be covered under this limited warranty for the time remaining under the original Warranty 
Period applicable to the part(s) repaired or replaced. 
 
The duration of 

ALL OTHER WARRANTIES, INCLUDING ANY AND ALL IMPLIED WARRANTIES, 

INCLUDING BUT NOT LIMITED TO MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE, ARE RESTRICTED TO THE TWO-YEAR LIMITED WARRANTY PERIOD.

 Some states do 

not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to purchaser. 
 

WHAT IS COVERED BY THIS WARRANTY 

This limited warranty covers defects in materials or workmanship, subject to the exclusions below and for the time 
period stated above. Manufacturer promises to repair or to replace, at Manufacturer’s sole and absolute discretion, 
any part of this water cooler that proves to be inoperative due to a defect in material or workmanship under normal 
use. 

 
WHAT IS NOT COVERED BY THIS WARRANTY 

This limited warranty does not extend to and expressly excludes: 
• conditions, losses, malfunctions, or damages not resulting from defects in material or workmanship; 
• conditions, malfunctions, losses, or damages or the inability to operate the Vertex unit resulting from 
   conditions beyond Manufacturer’s control, including but not limited to failure of the unit or any of its 
   parts due to damage caused by: improper installation; accident; fire; flood; windstorm; acts of God; 
   rodent and/or insect infestation; vandalism; modification; alteration; combination with any other device 
   or machine; abuse and/or misuse of the unit; negligence by purchaser or third parties; any part of the 
   water system that has become fouled due to liming, dirt, unsatisfactory/unsanitary water conditions, 
   corrosion, or faulty plumbing; failure to install, maintain, assemble, mount or place the Vertex unit in 
   accordance with Manufacturer’s instructions and/or local, state, or national plumbing and electrical 
   codes; wear and tear expected to occur in the normal course of use, including but not limited to cosmetic           
   rust, scratches, dents or comparable and reasonably expected losses or damages; exposure to extreme       
   variations in ambient environmental conditions (including but not limited to changes in heat, humidity,   
   moisture, or exposure to sunlight). 
• labor for installation or deinstallation of the unit or any of its parts; shipping of the unit or any of its parts 
   to Manufacturer for repair/replacement. 
 
In addition to the above exclusions, this limited warranty does not apply if any of the following conditions 
of operation are not met: System Pressure 35 - 100 psi, Temperature 40 - 100 degrees F, PH range 4 - 10,Max 
TDS 1500 PPM Max., Turbidity <1.0NTU, Hardness <20gpg, R version: <3.5 gpg, F version, Iron 
<0.1 mg/l, Manganese <0.1 mg/l, Hydrogen Sulfid e <0.00 mg/l.

 

 

3.1  Assembly 

 
 

The PWC-900 assembly drawing is shown in Figure 1. The cooler has 

one chilling chamber and one hot tank. This chilling chamber  water tank holds 
one gallon of water. and is automatically filled at start-up. The cold water drink-
ing line is comprised of an array of  sealed stainless steel coils and is sub-
merged inside this tank . This water is cooled in the chilling chamber with refrig-
erant coils. There is a separate hot water tank with an internal heater coil which 
is fed by water pressure directly from the line in. The hot water tank is directly 
beside the cold water tank. The compressor and expansion valve are inside the 
cabinet. The controls for dispensing water are on the front panel.   

3.0 Description 

Figure 1 

Flow Schematic 

 

Summary of Contents for PureWaterCooler PureChill PWC-900

























Reviews: