Vertex Standard VXD-720 digital Operating Manual Download Page 91

Page: 91 / 98

Turning the Radio Tones/Alerts On or Off

You can enable and disable all radio tones and

alerts (except for the incoming Emergency alert

tone) if needed.

Procedure

Press the programmed

All Tones/Alerts

button to

toggle all tones on or off.

Follow the procedure below.

to access the menu.

to “

Utilities

” and press

to select.

to “

Radio Settings

” and press

select.

to “

Tones

Alerts

” and press

to se-

lect.

to “All

Tones

” and press

to select.

The display shows “

Turn On

”. Press

to en-

able all tones and alerts. The display shows “

All

Tones On

”.

The display shows “

Turn Off

”. Press

to dis-

able all tones and alerts. The display shows “

All

Tones Off

”.

Setting the Tone Alert Volume Offset Level

You can adjust the Tone Alert Volume Offset level if

needed.
This feature adjusts the volume of the tones/alerts,

allowing it to be higher or lower than the voice

volume.

Procedure

to access the menu.

to “

Utilities

” and press

to select.

to “

Radio Settings

” and press

select.

to “

Tones

Alerts

” and press

to se-

lect.

to “

Vol. Offset

” and press

to se-

lect.

to the required volume value. The

radio sounds a feedback tone with each corre-

sponding volume value.

Press to keep the required displayed volume

value. The display shows “

Volume Offset Selected

”.

Repeat Step 6 to select another volume value.

to exit without changing the current volume

offset settings.

ance

tures

Summary of Contents for VXD-720 digital



































































































Search results

Summary of Contents for VXD-720 digital

Reviews:

Related manuals for VXD-720 digital

Brands by name

Popular brands

Vertex Standard VXD-720 digital, Operating Manual

Search results

Summary of Contents for VXD-720 digital

Reviews:

Related manuals for VXD-720 digital

Brands by name

Popular brands