manualshive.com logo in svg

Vertex Standard VXD-720 digital, Operating Manual, Page: 73 / 98

Share
Download
Vertex Standard VXD-720 digital Operating Manual Download Page 73

71

  Use the keypad to type your message.

  Press 

 to move one space to the left.

  Press 

 or the 

 key to move one space to 

the right.

  Press  the 

  key  to  delete  any  unwanted 

characters.

5

  Press   once message is composed.

6

 

 or 

 to “Send” and press 

 to send the 

message.

  OR

 

 or 

 to “

Save

” and press 

 to save the 

message to the Drafts folder.

  OR

 

 to edit the message.

 

 again to delete the message or save it to 

the Drafts folder.

7

 

 or 

 to the required alias or ID and press 

 to select.

  OR

 

 or 

 to “

Manual Dial

” and press 

 to se-

lect.

  Key in the subscriber ID and press  .

8

  The display shows “

Text Message: <Subscriber

/

Group Alias or ID>

”, confirming your message is 

being sent.

9

  If the message is sent, a tone sounds and the 

display shows “

Message Sent

”.

  OR

  If the message is not sent, a low tone sounds 

and the display shows “

Message Send Failed

”.

If the text message fails to send, the radio returns 

you to the “

Resend

” option screen (see 

Managing 

Fail-to-Send Text Messages

 on page 74).

1

 

Sending a Quick Text Message

Your radio supports a maximum of ten (10) Quick 

Text messages as programmed by your dealer.
While Quick Text messages are predefined, you 

can edit each message before sending it.

Procedure

:

Press the programmed Text Message button and 

proceed to Step 3.

OR

Follow the procedure below.

1

 

 to access the menu.

2 

 or 

 to “

Message

” and press 

 to select.

3

 

 or 

 to “

Quick Text

” and press 

 to se-

lect.

4

 

 or 

 to the required Quick Text and press 

 to select.

5

  A blinking cursor appears.

  Use the keypad to edit the message, if required.

a

DV

ance

D

 f

ea

tures

Summary of Contents for VXD-720 digital



































































































Reviews:

No comments