background image

 

 

 

PLEASE SAVE THESE INSTRUCTIONS 

WARNING:  READ THIS OWNER’S MANUAL CAREFULLY BEFORE USE. 

 

Thank you for choosing a VERSONEL Infrared Quartz Heater. This owner’s manual will 
provide you with valuable information necessary for the proper care and maintenance of your 
new product. Please take a few moments to thoroughly read the instructions and familiarize 
yourself with all the operational aspects of your new heater.  

 

 

IMPORTANT INSTRUCTIONS 

 

When using this electric unit, basic safety precautions should always be followed to reduce the 
risk of fire, electric shock, and injury to persons, including the following: 

 

1.

 

Read ALL instructions before using this unit. 

2.

 

CAUTION: Risk of Electric Shock. DO NOT open or try to repair the heater yourself. 

3.

 

This heater may get hot when in use. To avoid burns, DO NOT let bare skin touch hot 
surfaces. If provided, use handles when moving this heater.  

4.

 

Keep combustible materials, such as furniture, pillows, bedding, paper, clothes, and 
curtains at least 3 ft from the front of the heater and keep them away from the sides, top, 
and rear. DO NOT place towels or other objects on the heater.  

5.

 

Extreme caution is necessary when any heater is used by or near children or the disabled, 
or when the heater is left operating and unattended. 

6.

 

DO NOT operate any heater with a damaged cord or after the heater malfunctions, has 
been dropped or damaged in any manner. Return heater to authorized service facility for 
examination, electrical or mechanical adjustment, or repair. 

7.

 

This heater is not intended for use in bathrooms, laundry areas and similar indoor 
locations. NEVER locate heater where it may fall into a bathtub or other water container. 
To protect against electrical hazards, DO NOT immerse in water or other liquids.  

8.

 

DO NOT touch the control panel or plug with a wet hand.  

9.

 

DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or 
similar coverings. Arrange cord away from traffic area and where it will not be tripped 
over. 

Summary of Contents for VSL1500H6E













Reviews: