8
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet.
and
turn on the power switch in the rear of the unit. Only operate heater in upright position with
caster wheels attached.
Insert 2 AAA batteries into the remote control before using (Batteries Not Included)
OPERATING INSTRUCTIONS
1. Start and select working mode
Or
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the Power button on the
supplied remote control.
Once power is off, heating element will stop working at first.
Fan will prolong working for 3 minutes to emit plenty of
heat inside
and to cool down all the heating
elements.
. This mark will indicate running during the 3 minutes.
Or
Select a heat Mode
Press the MODE button to toggle between the three heat
modes.
High Mode uses 1500W; Low Mode uses 1000W. ECO
mode is an Economic Energy Saving Function. When ECO
mode is chosen,
the heater will operate from less to more
heating power (watts) in an attempt to maintain a constant
warm 68
℉
(20
℃
).
NOTE: When ECO Mode is on, the heater will not
cycle on and off. Heater will continue working to
maintain the desired temperature.
