02
03
1
2
3
4
!
!
How to assemble
5
TIP
Assemble the strainer under the groove of spinning brush
just as in the picture.
After fitting the hopper on the chamber, turn it clockwise
until it is locked completely.
Mount the chamber set on the base.
Assemble each part in its proper place by
turning it left and right in the chamber just
as in picture no.1.
Spinning
brush
grooves
Squeezing
screw
Spinning brush groove
Assemble the squeezing screw as in the
picture above.
Lock the squeezing screw by turning it and push it in
the spinning brush grooves.
If the chamber set is not correctly assembled, the chamber can not be closed.
*
If the strainer is not placed
below the groove, the hopper
can not be locked.
Even if the hopper is
assembled in the
opposite direction,
the juicer can still be
operated.
The silicone packing can be
detached and cleaned.
