Configuration and Setup
EBX-37 Reference Manual
9
3. Attach Power
Plug the power adapter cable VL-CBR-2022 into connector J6. Attach the motherboard
connector of the ATX power supply to the adapter.
4. Review Configuration
Before you power up the system, double check all the connections. Make sure all cables
are oriented correctly and that adequate power will be supplied to the VL-EBX-37 and
peripheral devices.
5. Power On
Turn on the ATX power supply and the flat panel display. If the system is correctly
configured, a video signal should be present.
6. Select a Boot Drive
During startup, press the B key to display the boot menu. Insert the OS installation CD in
the CD-ROM drive, and select to boot from the CD-ROM drive.
7. Install Operating System
Install the operating system according to the instructions provided by the OS
manufacturer. (See Operating System Installation.)
Note
If you intend to operate the VL-EBX-37 under Windows XP or Windows XP
Embedded, be sure to use Service Pack 3 (SP3) and all updates for full support of
the latest hardware features.
CMOS Setup
See VersaLogic KnowledgeBase article
VT1665 - EBX-37 Mamba CMOS Setup Reference
for
complete information about the CMOS Setup parameters.
Operating System Installation
The standard PC architecture used on the VL-EBX-37 makes the installation and use of most of
the standard x86 processor-based operating systems very simple. The operating systems listed on
the
VersaLogic OS Compatibility Chart
use the standard installation procedures provided by the
maker of the OS.
