background image

Distributor of VersaLogic Corporation: Excellent Integrated System Limited

Datasheet of VL-CBR-2012 - 20" 24-BIT LVDS CABLE 
Contact us: [email protected] Website: www.integrated-circuit.com

Interfaces and Connectors 

VL-EPMs-21 Reference Manual

 

39

 

Audio 

The audio interface on the VL-EPMs-21 is implemented using the Integrated Device Technology 
92HD75B2X3 Audio Codec. This interface is Intel High Definition Audio-compatible. Drivers 
are available for most Windows-based and Linux operating systems. To obtain the most current 
versions, consult the VL-EPMs-21 product support page

.

 

The J7 main I/O connector provides the line-level stereo input and line-level stereo output 
connection points. The outputs will drive any standard-powered PC speaker set.  

Table 15: VL-CBR-5012 J3 Audio Connector Pinout 

J3 

Pin 

Signal 
Name 

 
Function 

LINE_INL 

Line-In Left 

LINE_INR 

Line-In Right 

HDA_GND 

HDA Ground 

LINE_OUTL 

Line-Out Left 

LINE_OUTR 

Line-Out Right 

HDA_GND 

HDA Ground 

Note:

 

In Windows, the rear line-in audio input is not enabled as the default audio input 
device. To use audio input, enable the rear line-in audio input via the IDT control 
panel software utility. 

                            46 / 64

                            46 / 64

Summary of Contents for Ocelot

































































Reviews: