Configuration and Setup
EBX-22 Reference Manual
14
Firmbase Tab
Main Exit Boot POST SIO Features
Firmbase
Misc Board
+ ------------------------------------------------------ + ------------------- +
|
Features Enabled by Firmbase[R] Technology
|Enable to support USB|
| ------------------------------------------------------ |keyboard and mouse |
|
Legacy USB
[
Enabled
] | |
| USB Boot [Enabled] | |
| EHCI/USB 2.0 [Enabled] | |
| Firmbase Disk I/O [Disabled] | |
| | |
|
Basic Firmbase[R] Technology Configuration
| |
| ------------------------------------------------------ | |
| Firmbase Technology [Enabled] | |
| Firmbase Debug Log [None] | |
| Firmbase System Console [None] | |
| Firmbase Shell on Serial Port [None] | |
| Quiet Mode [Disabled] | |
| Strict Mode [Enabled] | |
| Bypass Mode [Enabled] | |
| TCB Security [Enabled] | |
| Statistics [Enabled] | |
| Clear Memory [Disabled] | |
| Use TSC [Enabled] | |
| Timer Optimization [Disabled] | |
| Debug Yields [Disabled] | |
| | |
| ... | |
| | |
+ ------------------------------------------------------ + --------------------+
Note: It is strongly advised that settings on this tab beyond the Basic Firmbase Technology
Configuration section not be changed.
Misc Tab
+ ------------------------------------------------------ + ------------------- +
|
Cache Control
|Enable to allow CPU |
| ------------------------------------------------------ |level cache to |
|
CPU Cache
[
Enabled
] |operate. |
| System Cache [Enabled] | |
| | |
|
Keyboard Control
| |
| ------------------------------------------------------ | |
| Keyboard Numlock LED [Disabled] | |
| Typematic Rate [30/sec] | |
| Typematic Delay [250ms] | |
| | |
|
Miscellaneous BIOS Configuration
| |
| ------------------------------------------------------ | |
| Lowercase Hex Displays [Disabled] | |
| | |
| | |
| | |
+ ------------------------------------------------------ + ------------------- +
StockCheck.com
