Wireless Access Point User Guide
110
get encryption
Display Encryption Mode
get extendedchanmode
Display Extended Channel Mode
get firStepLvl
Display ANI Parameter for FirStepLevel
get fragmentthreshold
Display Fragment Threshold
get frequency
Display Radio Frequency (MHz)
get gateway
Display Gateway IP Address
get gbeaconrate
Display 11g Beacon Rate
get gdraft5
Display 11g Draft 5.0 compatibility
get groupkeyupdate
Display Group Key Update Interval (in Seconds)
get hardware
Display Hardware Revisions
get hostipaddr
Display Host IP Address
get ipaddr
Display IP Address
get ipmask
Display IP Subnet Mask
get keyentrymethod
Display Encryption Key Entry Method
get keysource
Display Source Of Encryption Keys
get login
Display Login User Name
get minimumrate
Display Minimum Rate
get nameaddr
Display IP address of name server
get nf
Display Noise Floor
get noiseImmunityLvl
Display ANI Parameter for Noise Immunity Level
get ofdmTrigHigh
Display Higher Trigger Threshold for OFDM Phy Errors for ANI
Control
get ofdmTrigLow
Display Lower Trigger Threshold for OFDM Phy Errors for ANI
Control
get ofdmWeakSigDet
Display ANI Parameter for OFDM Weak Signal Detection
get overRidetxpower
Display Tx power override
get operationMode
Display Operation Mode
get power
Display Transmit Power Setting
get quietAckCtsAllow
Display if Ack/Cts frames are allowed during quiet period
get quietDuration
Display Duration of quiet period
get quietOffset
Display Offset of quiet period into the beacon period
get radiusname
Display RADIUS server name or IP address
get radiusport
Display RADIUS port number
