Setup
31
Advanced Settings
Clicking the
Advanced
link on the menu will result in a screen like the following.
Figure 18: Advanced Settings
Data - Advanced Settings Screen
Basic Rate
Basic Rate Selection
The Basic Rate is used for broadcasting. It does not determine
the data transmission rate, which is determined by the "Mode"
setting on the Basic screen.
Select the desired option.
Do NOT select the "802.11g" or "ODFM" options unless ALL
of your wireless clients support this. 802.11b clients will not be
able to connect to the Access Point if either of these modes is
selected.
Data Rate
Select the desired option, always select “best”.
Options
Worldwide Mode
(802.11d)
Enable this setting if you wish to use this mode, and your
Wireless stations support this mode.
XR ( eXtended Range)
Enable this setting if you wish to use this mode, and your
Wireless stations support this mode.
Network Integrality
Check
Network Integrality Check is one function that if the wired
connect of AP is invalidate, the AP will disable the wireless
connection.
