28
TIMER
The timer function is only used to count the time and does not influence oven
operation or any programmes which are in progress or set.
1. Press button 1 - “
0:00
” appears on the programmer display.
2. Press keys 5 or 6 to set the time required (or turn the temperature knob to the
right to increase the time and to the left to reduce it) - the bell symbol lights up
on the display.
3. The countdown starts immediately and the time appears again.
4. To see the countdown press button 1. The time will be indicated in hours and
minutes; the seconds are only indicated for the last minute.
5. At the end of the countdown an audible signal sounds and the bell symbol goes
out. Press any button to stop the audible signal.
IMPORTANT WARNING: This function is only an electronic alarm and does not
switch OFF the oven. Remember to turn
to
OFF
(oven OFF)
manually the selector
knob at the end of the countdown.
AUTOMATIC COOKING -
Start cooking at the programmed time and
switch the oven off automatically after the programmed cooking time
OR SEMI-AUTOMATIC COOKING -
Start immediate cooking and
switch the oven off automatically after the programmed cooking time
Setting
1. Set the cooking function by turning the oven selector to the function required.
2. The pre-set cooking temperature appears on the display. To change it proceed
as described in the “SETTING THE COOKING” chapter.
3. Press key 3 of the programmer to confirm the cooking function.
4. Press button 2: “
0:00
” appears on the electronic programmer display.
Press buttons 5 or 6 to set the cooking time or turn the temperature knob to the
right to increase the time and to the left to reduce it (cooking time in hours and
minutes: set it to ten minutes less than the time required because the stored heat
will complete the cooking). “
A
” appears on the display.
5. Press button 3; then press buttons 5 or 6 to set the time when the cooking should
finish or turn the temperature knob to the right to increase the time and to the
left to reduce it.
6. The display reads the set temperature.
Semi-automatic cooking:
If you are already at home to turn the oven on and
only want the oven to turn off automatically, start cooking as normal, then
follow step 4 or step 5 to set the cooking time or a time to stop the oven.
Starting cooking
7. The cooking symbol
lights up. The oven switches on and the cooking cycle
set starts.
During cooking
8. During the cooking cycle, the display shows the oven temperature measured by
the probe or pre-set temperature. Press key 2 to display the length of cooking
set. Press key 3 to display the stop time set. The cooking time, end of cooking
time and cooking temperature can be varied at any time, as described above.
At the end of cooking
9. “
End
” appears on the display, “
A
” flashes and the audible signal sounds. The
cooking cycle has finished and the oven is OFF. Press any programmer button
to stop the audible signal.
10. Turn the function selector to
OFF
(oven OFF). The programmer display shows
the time.
Note: At the end of the program always turn the function selector knob to
OFF
(oven OFF).
IMPORTANT: During AUTOMATIC COOKING PROGRAM the oven light is always
on, also before starting (heating elements on or cycling) of the programmed
cooking.
5
A
START
AM
PM
°F
°C
5
1
6
HEATING
A
START
AM
PM
°F
2
A
START
AM
PM
A
°F
°C
°C
3
5
6
5
6
A
START
AM
PM
°F
3
°C
A
START
AM
PM
°F
5
4
6
°C
HEATING
HEATING
HEATING
I I I
I
I I I
I I
I
I
I
I
1
2
3
5
4
9