12
Error code
Example
What to do
Er20, Er31
or Er47
or
display
not operative
1. Switch off the cooker and disconnect it
from the mains.
2. Wait for about 1 minute, then reconnect
the cooker and turn on the cooking zones.
3. Wait for about 1 minute and if the error
message does not appear again the
cooking zones can be used.
4. If the problem continues do not use the
induction hob (only use the oven) and
contact your Authorised Service Centre.
E2
E and 2 alternating for one or more cooking
zones.
This indicates an overheating of the cooking
zone/s.
1. Switch off the cooking zone/s and leave
to cool.
2. If the problem continues do not use the
induction hob (only use the oven) and
contact your Authorised Service Centre.
E6
or
E7 or E9
or E5
1. Switch off the cooker and disconnect it
from the mains.
2. Wait about 1 minute, then reconnect the
cooker and turn on the cooking zones.
3. Wait for about 1 minute and if the error
message does not appear again, the
cooking zone can be used.
4. If the problem continues, make a note of
the error code, switch off the appliance
and contact your Authorised Service
Centre.
E4
This indicates an over-voltage on power supply.
1. Switch off the cooker and disconnect it
from the mains.
2. Check the correct power voltage is
available in the domestic electrical system
as indicated in the appliance rating label.
Symbol
as per
side
figure
This indicates an incorrect operation of one or
more cooking zone control knob.
1. Turn the cooking zone control knobs to
the
“
OFF
”
position, then switch off the
cooker and disconnect it from the mains.
2. Wait for about 1 minute, then reconnect
the cooker and turn on the cooking zones.
3. Wait for about 1 minute and if the error
message does not appear again the
cooking zones can be used.
4. If the error message does not disappear
repeat step from 1 to 3.
5. If the problem continues do not use the
induction hob (only use the oven) and
contact your Authorised Service Centre.
ERROR CODES ON THE COOKING ZONES DISPLAY
2
