13
PRESSURE REGULATOR INSTALLATION
To cooktop
UNLOCK
LOCK
LOCK
To cooktop
LOCK
Arrow
STEP 1
The elbow connection can be turned in the direction required after
the manifold female pipe fitting has been slackened by using a
wrench.
Then tighten the elbow-manifold female pipe fitting connection by
using a wrench before proceeding with gas connection.
When tightening keep the elbow connection firm i.e. by using an
adjustable pliers or an adjustable wrench (pay attention not to
damage the thread).
STEP 2
Mount the extension pipe to the elbow connection interposing the
gasket supplied and tighten by using a wrench.
When tightening keep the elbow connection firm i.e. by using an
adjustable pliers or an adjustable wrench (pay attention not to
damage the thread).
STEP 3
Mount the 3/8” NPT (conical) male connector to the pressure
regulator and tighten by using a wrench.
Do not over tighten the connector. Over tightening may crack
regulator.
STEP 4
Assemble the 3/8” NPT con pressure regulator group to the
extension pipe interposing the gasket supplied.
IMPORTANT: use two spanners to tighten the connection.
Fig. 5.2a
Fig. 5.2b
Fig. 5.2c
Fig. 5.2d
