17
20306755
30ILDV Series Gas Fireplace Insert
REMOTE WALL MOUNTED SWITCH
A remote wall switch and up to fifteen (15) feet of 18 Ga.
wire may be used with this appliance. Attach the wall
switch in a junction box at the desired location on the wall.
Figure 14
.
NOTE: Extended lengths of wire may cause the fireplace
not to function properly. Longer length of wire is permitted
if the wire is made out of larger gauge (diameter) wire.
Always check with local code.
PILOT
HI
LO
ON
OFF
FP1933
wall switch wiring
Figure 14 -
Wiring Diagram for Wall Switch
Sparker
Thermocouple
Piezo Igniter
Thermopile
Pilot Assembly
Switch
Millivolt
Valve
TH
TP
TH/TP
ON
OFF
Optional 15'
Wall Switch
Optional
Remote Control
ON
OFF
ON
OFF
HAND HELD REMOTE CONTROL
The remote control receiver may be installed in the control
panel by removing the ON/OFF switch and the knock-out
plate. Slide the receiver into the space where the knock-out
plate was removed. Refer to remote instructions for wiring
and operation.
FP2177
remote receiver
Figure 15 -
Remote Receiver
FP2177
Remote
Receiver
INSERT INSTALLATION
