73
User Guide ’14 Analogsynthesizer
EN
MIDI settings
Setting the MIDI input and output channel
The procedure to set the MIDI-input and -output channel is almost identical. Carry out the following
steps to do so:
1. Make sure, the ’14 Analogsynthesizer is in standard play-mode (
ARPEGGIATOR
switch
i
set to
OFF
).
2. Enter the edit mode by pressing the
[EDIT]
button – the corresponding LED will be lit.
3. Use the
select dial to select the desired parameter - the yellow LED above the
VALUE
button
will start blinking:
1. EDIT PARAMETER
[1] MIDI IN CHANNEL
sets the MIDI input channel
2. EDIT PARAMETER
[2] MIDI IN CHANNEL
sets the MIDI output channel
4. Use the
VALUE
button to activate the selected parameter.
5. Use the select dial 1..16 to select the desired MIDI channel. If reaching the currently selected
MIDI channel, the yellow LED above the
VALUE
button will be lit.
6. Confirm the desired MIDI-channel using the
VALUE
button – the yellow LED will be lit.
7. Exit EDIT mode by pressing the
[EDIT]
button.
