V-series wheelchairs
2018-10
Adjustments
Installation manual
- 10 -
EN
NL
PL
CS
3.4.2 Adjustment of cross and backrest connection
The settings and item numbers can be found in following sections
Cross position (if adjustable)
1. Remove clip (10), at each side of the wheelchair.
2. Move the cross (X) forwards/backwards to the desired position according to the settings
in the tables of previous sections.
3. Replace both clips (10) at each side of the wheelchair to lock the cross position.
Backrest-connection position
1.
Demount both socket screws of the backrest connection, at both sides of the wheelchair.
2. Move the backrest connection (A/B/C/D) forwards/backwards to the desired position
according to the settings in the tables of previous sections.
3. Mount the 2 socket screws firmly; at both sides of the wheelchair.
4. Verify if seat height and seat angle are correctly set.
3.4.3 Seat depth option 1
This type of wheelchair is only adjustable in 3 seat
depths by adjusting the backrest connection (A).
V300XL
Seat depth
Backrest
position holes
490 mm
(Default)
1
510 mm
2
530 mm
3
3.4.4 Seat depth option 2
This type of wheelchair is adjustable in 5 seat depths by adjusting the location of the frame
cross (X) and backrest connection (B), see picture on next page.
V300 30°
Seat depth
Cross position
holes
Backrest
position holes
460 mm
Hole 1 and 3
1
440 mm (Default)
Hole 2 and 4
1
500 mm
Hole 1 and 3
2
480 mm
Hole 2 and 4
2
520 mm
Hole 1 and 3
3
A
1
3
2