![Vermeiren V200 Installation Manual Download Page 19](http://html.mh-extra.com/html/vermeiren/v200/v200_installation-manual_1005625019.webp)
V-series wheelchairs
2018-10
Adjustments
Installation manual
- 15 -
EN
NL
PL
CS
3.9
Arm pad height and depth (option 1)
This arm pad (see picture on next page) is adjustable in height and depth, each in 3
positions. The height is adjusted by adding or removing distance blocks. The depth is
adjusted by using different mounting holes.
To adjust:
1. Remove both socket screws (34).
2. Place the correct number of blocks below and above the frame tubes, see table 1.
3. For depth adjustment, install the arm pad by using the correct mounting holes, see table 2.
Table 1
Height arm pad to seat
Number of blocks
below tube
Number of blocks
between tube and arm pad
220 mm (Default)
2
1
230 mm
1
2
240 mm
0
3
Table 2
Depth of the arm pad
Used holes
Front position
Back and middle
Middle position (Standard)
Hole 2 and 4
Back position
Front and middle
3.10
Arm pad depth (option 2)
Adjust the depth of the arm pad as follow (range
120 mm: step less):
1. Loosen both socket screws (35) at the bottom
of the arm pad.
2. Move the arm pad to the front or rear within
the range of the slotted holes (42,5 mm).
If this not enough, loosen the socket screws
and attach the arm pad using the other holes
(3 positions available).
3. Tighten both socket screws firmly.
4. Repeat this for the second arm pad. Make sure both arm pads are positioned identically.
35
34