Timix
2021-05
Content
Installation manual
- 11 -
EN
NL
PL
CS
3.2.10 Operating console
Mounting position left or right
1.
Cut the cable ties and unplug the power cable from
the operating console.
2.
Hold the control with its support (3) while removing
M6 socket screw (41).
3.
Loosen hex nut (42) and demount shaft (43) from the
armrest.
4.
Mount shaft (43) in the other armrest and lock it with
hex nut (42).
5.
Mount the control support (3) with socket screw (41)
on the shaft (43).
6.
Make sure all connections are well secured.
7.
Guide the cable and plug the cable in the operating console.
8.
Tie the cable to the back of the wheelchair subframe and on the armrest with cable ties.
Make sure that the cable is long enough to make the adjustment of armrest and console
possible.
Operating console - height
The height of the operating console can be adjusted in 2+4 positions, or 6+4 positions depending
on the type of shaft:
1.
Hold the control while removing M6 socket screw (41).
2.
Move the control support (3) up/down on shaft (43) and mount the socket screw (41).
3.
If necessary adjust the height of the console on shaft (45) in the same way and lock it with
socket screw (44).
4.
Make sure all connections are well secured.
5.
Guide the cable and plug the cable in the operating console.
3.3
Changing the battery
Risk of injuries and damage
The batteries must only be replaced by trained personnel
Do not come into contact with the acid from the batteries.
Replace the batteries in a well-ventilated room.
Make sure that the ventilation holes of the battery housing are free from any contaminations.
First read the charging instructions in the user manual before charging the batteries.
1. Take off the rear battery cover by removing the knobs on the top and bottom. You can now
reach the batteries.
Replace both batteries at the same time and with
the same type as the ones used in the wheelchair.
If this is not possible, contact the nearest Vermeiren
facility.
CAUTION
3
43
42
41 44
45
Battery connections:
1) Blow fuse
2) Plug (electronic system)
Summary of Contents for Timix
Page 1: ...VERMEIREN INSTALLATION MANUAL Timix...
Page 2: ......
