Timix
2021-05
Content
Installation manual
- 9 -
EN
NL
PL
CS
3.2.8 Leg rests BZ7/BZ8 adjustments
Leg rest length
Risk of injuries or damage
The maximum length of the footrest is limited to the length indicated by
a triangle on the front of the footrest tube, see picture. This maximum
length adjustment is not possible in sitting position; the footplates will
touch the ground.
Make sure that the distance to the ground in sitting position is minimal
60 mm to avoid touching small obstacles and to prevent damage to the
footrest.
To adjust the length of the legrests:
1. Remove the socket screw (24) on the back of the footrest.
2. Adjust the footrest to a comfortable length.
3. Retighten the socket screw firmly.
4. Repeat for the second footrest. Make sure that the footrests are
positioned identically.
Footplate angle
To adjust the angle of the footplate at its toothed clamp:
1. Loosen the socket screw (25) on the footrest (26).
2. Turn the footplate in the desired angle (80°- 100°). The
dashes (27) on the toothed clamp indicate the angular
positions.
3. Retighten the socket screw (25).
4. Repeat for the second footrest.
Calfrest height
1. Turn the calfrest outwards.
2. Loosen the socket screw (30) that clamps the calfrest
support on the footrest.
3. Slide the calfrest up/down to a comfortable position (step
less).
4. Retighten the socket screw (30) with nut.
5. Repeat this for the second calf rest. Make sure that the calf
rests are positioned identically.
CAUTION
25
26
27
24
30
Summary of Contents for Timix
Page 1: ...VERMEIREN INSTALLATION MANUAL Timix...
Page 2: ......
