Timix
2021-05
Content
Installation manual
- 7 -
EN
NL
PL
CS
3.2.3 Width between armrests
Risk of injuries
The maximum width is indicated by two triangles on each side of the seat,
see picture.
The outer triangles may not be covered by the frame tube.
To adjust the width of the armrests:
1. Loosen the two M8 socket screws (32) at the bottom of the seat frame, behind the securing
hooks.
2. Adjust the armrest to a comfortable width.
3. Tighten the socket screws (32) firmly.
4. Repeat this at the other side of the wheelchair.
5. Make sure the armrests are positioned identically on both sides of the seat.
3.2.4 Armrest length
The telescopic armrest can be adjusted in 6 positions as follows:
1.
If necessary, cut the cable ties that hold the power cable of the console.
2.
Loosen the socket screw (33).
3.
Slide the inner tube (34) in/out to the desired length.
4.
Insert socket screw (33) and tighten properly.
5.
Repeat this for the second armrest.
6.
Make sure both armrests have the same length.
7.
Make sure that both armrests are firmly secured.
8.
Tighten the cable with cable ties.
CAUTION
34
33
32
32
Summary of Contents for Timix
Page 1: ...VERMEIREN INSTALLATION MANUAL Timix...
Page 2: ......
