Vermeiren Inovys II+L70, User Manual

Page: 10 / 16

Inovys II + L70
2021-01
Installation and adjustments
8
EN
NL
4 Installation and adjustments
Important remarks
•
Be aware of the technical details and limits of intended use.
•
For more information, contact Vermeiren.
4.1 Tools
To (dis)assemble and adjust the wheelchair, the following tools are needed:
•
Allen keyset n° 4
4.2 Scope of delivery
The following items are part of the delivery:
•
Framework with seat, backrest, wheels, armrests, leg rest, and L70 granule seat system
•
Headrest
•
User manual
Before use, check if everything is included and that no products are damaged.
Please note that the basic configuration may differ in different European countries. Contact your
specialist dealer.
4.3 Assembly
The wheelchair is delivered fully assembled.
4.4 Adjustments
4.4.1 Leg rest length
The length of the leg rest can be adjusted in 4 positions.
1. Take off the L70 granule cushions (1) from the leg rest
frame.
2. Remove the lower foam protection (2) from the leg rest
tubes.
3. Loosen and remove the screw-nut connection (3) on
both sides of the leg rest.
4. Move the inner tubes with foot plate up/down in the outer
frame tubes until the desired length is reached.
5. Replace the screws (3) and tighten firmly by hand.
6. Replace the foam protection (2).
7. Reattach the granule cushions (1) to the leg rest frame.
Risk of injuries or damage
The wheelchair needs to be (dis)assembled and adjusted by a specialist dealer according to
the instructions in this chapter.
Only use parts and tools described in this manual.
While (dis)assembling and operating the wheelchair, make sure no objects or body parts get
caught between moving parts.
Make sure all screws are firmly secured before driving.
CAUTION
1
2
3