Forest 3
2020-03
Assembly and adjustments
Installation manual
- 12 -
EN
NL
PL
CS
1. Lift the driving wheel from the ground using a jack.
2. Remove the socket screws (50) and take the wheel from the
flange.
3. Open tyre valve and push it gently to release the air.
4. Loosen the 5 screws that connect both rim halves (on the
inner rim half).
5. Separate the rim halves and remove the inner tube from the
tyre.
6. Inflate the new or repaired inner tube partly.
7. Insert the inner tube into the tyre.
8. Place the two rim halves back on the tyre. Make sure that the
tube valve pops out of the opening in the rim.
9. Connect the rim halves with the 5 socket screws. Tighten by hand.
10. Inflate the tyre at the correct pressure, see the indication on the tyre.
11. Remove grease and other contamination from the thread of the 5 flange socket screws (48).
Apply screw adhesive (ex. Loctite) to these screws.
12. Mount the wheel on the flange.
13. Lower the jack.
14. Make sure the socket bolts are firmly secured.
3.4.2 Steering wheels (front wheels)
DISMANTLING
A.
Loosen the screw on the steering wheel axle and remove it from the steering wheel fork.
B.
Let the air out of the steering wheel by lightly pressing the pressure pin on the valve.
C.
Loosen the 5 screws that hold the split rim together.
Now separate the rim sides.
ASSEMBLY
Insert the partly-filled inner tube into the tyre.
C.
Connect the two sides of the rim through the tyres and
use the 5 connecting screws to screw the rim together.
B.
Make sure that the valve juts out of the valve opening in
the rim.
A.
Put the wheel back into the front wheel fork and inflate
the wheel.
50