Forest 3
2020-03
Assembly and adjustments
Installation manual
- 8 -
EN
NL
PL
CS
Footrest width
1. Loosen the two screws (A) on the front of the seat frame.
2. Move the footrest in an horizontal direction until the correct seat
with, by moving the square tubes (B) and (C) over each other (3
different positions: steps 15 mm on each side).
3. Retighten the screws (A) properly.
4. Repeat instructions above for the other footrest.
3.2.6 Leg rests BZ7/BZ8
Leg rest length
Risk of injuries or damage
The maximum length of the legrest is limited to the length
indicated by a triangle on the front of the legrest tube, see picture.
This maximum length adjustment is not possible in sitting
position; the footplates will touch the ground.
Make sure that the distance to the ground in sitting position is
minimal 60 mm to avoid touching small obstacles and to prevent
damage to the legrest.
To adjust the length of the legrests:
1. Remove the socket screw (24) on the back of the legrest.
2. Adjust the legrest to a comfortable length.
3. Retighten the socket screw firmly.
4. Repeat for the second legrest. Make sure that the legrests are
positioned identically.
CAUTION
24
