Vermeiren Forest 3 SU, Installation Manual

Page: 12 / 16

Forest 3 SU
2020-07
Assembly and adjustments
Installation manual
- 10 -
EN
NL
Driving wheels (rear wheels)
DISMANTLING
A.
Unscrew and remove the axle nut on
the drive wheel and the 4 screws that
attach the wheel to the flange.
B. Let the air out of the wheel by lightly pressing
the pressure pin on the valve.
C. Unscrew the 5 screws on the inside of
the rim. Separate the rim sides.
ASSEMBLY
Insert the partly-filled inner tube into the tyre.
C. Connect the two sides of the rim through the
tyres and screw them back again.
B. Put the valve through the hole for it in the rim.
A. Put the wheel back on the flange and secure
these connection with the 4 screws. Afterwards
secure the wheel by hand-tightening the axle
nut. Inflate the wheel to the recommended tyre
pressure
.
3.4 Changing the batteries
Risk of injuries and damage

The batteries must only be replaced by trained personnel.

Do not come into contact with the acid from the batteries.

Replace the batteries in a well-ventilated room.

Make sure that the ventilation holes of the battery housing are free from any contaminations.

First read the charging instructions in the user manual before charging the batteries.

Replace both batteries at the same time and with the same type as the ones used in the
wheelchair. If this is not possible, contact the nearest Vermeiren facility.
CAUTION
24 V
+
+
-
-
Black
Red
1
2
1 = Blow fuse
2 = Plug (electronic system)
15
0
A