Vermeiren Forest 3 SU, Installation Manual

Page: 9 / 16

Forest 3 SU
2020-07
Assembly and adjustments
Installation manual
- 7 -
EN
NL
Adjusting calf rest width
Adjust the width of the calf rests as follow (2 different
positions over a range of 15 mm):
1. Incline the footplate with the operator control.
2. Loosen the screws
 just below the calf rests.
3. Adjust the calf rests to a comfortable width.
4. Retighten the screws
 properly.
3.2.5 Knee protector
The knee protector should always be used for the standing/upright function.
To swing away the knee protector:
1. Lift the knee protector upwards  . Not possible to remove
the knee protector, on one side the knee protector is
blocked by part
 .
2. Swing away the knee protector around tube  .
To mount the knee protector:
1. Turn the knee protector around tube  .
2. Mount the pen in the holder.
3. Push the knee protector downwards until the screw rest
on the holder.
4. Check the knee protector is attached very well.
Adjusting height knee protector
Adjust the height of the knee protector as follows
(range 60 mm: steps 20 mm):
1. Loosen the two screws  on both sides.
2. Adjust the knee protector to a comfortable
height by placing the two screws in another
hole. See that the screws on each side are
placed in a hole at the same height.
3. Retighten the two screws  properly.