Vermeiren Forest 3 SU, Installation Manual, Page: 7 / 16

Forest 3 SU
2020-07
Assembly and adjustments
Installation manual
- 5 -
EN
NL
3.2 Adjusting the wheelchair to the user
3.2.1 Adjusting the seat depth
The Vermeiren Forest 3 SU is adjustable in 3 different seat depths over a range of 50 mm (steps
of 25 mm). Adjusting the seat depth is at your own risk.
Risk of injury

Make sure all screws are firmly secured before driving with your electric wheelchair.

Adjusting the seat depth is on your own risk. Use the instructions below carefully to adjust the
seat depth by yourself.
Adjust the seat depth according to the instructions below (use the sequence below) :
Detail A: Adjust the backrest motor.
1. Loosen the screw from the backrest motor.
2. Move the motor more backwards or forwards until the desired position and until the relevant
holes lie above one another so that the fixing screws can be inserted.
3. Retighten the screw firmly by hand.
Detail B: Adjust the telescopic guide.
1. Loosen the screw from the telescopic guide.
2. Move the telescopic guide more backwards or forwards until the desired position and until the
relevant holes lie above one another so that the fixing screws can be inserted.
3. Retighten the screw firmly by hand.
Detail C: Moving the seat frame.
1. Loosen the two screws on either side of the frame.
2. Pull the seat more backwards or forwards until the
desired position and until the relevant holes lie above
one another so that the fixing screws can be inserted
through the frame.
3. Retighten the screws firmly by hand.
Hole Seat depth
1 500 mm
2 475 mm
3 450 mm
4 Not used
WARNING