Vermeer S925TX, Operator'S Manual

Page: 91 / 104

S925TX Mini Skid Steer Maintenance Intervals 60-1
Section 60: Maintenance Intervals
Visually inspect machine daily before starting the machine.
Make no modifications to your equipment unless specifically recommended by Vermeer Corporation.
S
AFETY
S
IGN
M
AINTENANCE
- 100 H
OURS
/M
ONTHLY
Safety signs located on your machine contain important and useful information that will help you operate your
equipment safely. Refer to the
Parts Manual for identification and location of safety signs.
To assure that all safety signs remain in place and in good condition, follow instructions given below:
• Keep safety signs clean. Use soap and water—not mineral spirits, abrasive cleaners, or other similar
cleaners that will damage the sign.
• Replace any damaged or missing safety signs. When attaching safety signs, the temperature of the
mounting surface must be at least 40°F (5°C). The mounting surface must also be clean and dry.
• When replacing a machine component with a safety sign attached, replace safety sign also.
• Replacement safety signs can be purchased from your Vermeer equipment dealer.
WARNING:
Use Shutdown Procedure before servicing, cleaning, repairing or
transporting machine. Follow Shutdown Procedure , page 23-1.