Vermeer S925TX, Operator'S Manual

Page: 73 / 104

S925TX Mini Skid Steer Preparation 40-9
Install/Remove
Before connecting any attachment to the machine, ensure all machine and attachment mounting plates are
free of dirt and debris in order to ensure the attachment can be properly connected.
Attachment - Install
Step 1: Position attachment on a level surface with sufficient area behind it to
accommodate the machine.
Step 2: Ensure pins are rotated until tops of pins face outward as shown (1) .
Step 3:
Start machine, and lower lift arm. Tilt loader mounting plate forward
slightly.
Step 4: Drive machine FORWARD, aligning loader mounting plate with
attachment.
WARNING: Attachment can fall off loader attachment mounting plate if
incorrectly attached. Death or serious injury could result.
When installing attachment, be certain that pins snap into place, pin tops are
rotated 90° inward, and pin ends are visible beneath attachment mount.
1